24
HOMS
+
OP
+
and OHDS
+
OP
+
Installation and Operation Manual
Chapter 3: Operation
Operation Notes
When setting the control parameters on the HOMS
+
OP
+
and
OHDS
+
OP
+
modules, observe the following:
•
If you make changes to certain parameters, other related parameters
may be affected also. See
“Cross-Functional Parameter Changes”
on page 25
for more information.
•
When you change a parameter, the effect is immediate. However,
the module requires up to 20 seconds to save the latest change.
After 20 seconds, the new settings are saved and will be restored if
the module loses power and must be restarted.
