HDX6800
+
B2/C2 and HDX6800
+
B4/C4 Installation and Operation Manual
29
Chapter 3: Operation
Channel Dithering
When any audio output channel is of a Non-PCM format
(
Output Chxx Format
=Non-PCM or
Output Chxx Format
=Auto
and
Out Chxx Format Fb
=Non-PCM), the Dithering feature for that
channel pair (1-2, 3-4, etc.) is disabled, even if only one channel of the
pair is Non-PCM. Both channels in the pair must be of a PCM format
for the Dithering feature for that channel pair to be re-enabled.
For example, if
Output Ch01 Format
is set to Non-PCM (or
Output
Ch01 Format
=Auto
and
Out Ch01 Format Fb
=Non-PCM), then
output channel pair 01-02 has dithering disabled (
Out 01-02 Dithr
Mode
is set to None and the parameter is disabled), even if
Output
Ch02 Format
is PCM. If both
Output Ch01 Format
and
Output
Ch02 Format
are changed to PCM, then the
Out 01-02 Dithr Mode
parameter is re-enabled.
Channel Word Length
When any audio output channel is of a Non-PCM format, the Word
Length feature for that channel pair is forced to 24-bits and the
parameter is disabled, even if only one channel of the pair is Non-PCM.
Both channels in the pair must be of a PCM format for the Word Length
feature for that channel pair to be re-enabled.
For example, if
Output Ch01 Format
is set to Non-PCM, then the
Out
Ch01-02 Word Len
parameter is set to 24 bits and that parameter is
disabled, even if
Output Ch02 Format
is PCM. If both
Output Ch01
Format
and
Output Ch02 Format
are changed to PCM (or Auto, and
the associated feedback parameters are PCM), then the
Out Ch01-02
Word Len
parameter is re-enabled.
Channel Fade Rate
The channel fade rate is a single control for all output channels. This
feature is only applied to output channels operating in PCM format. It is
automatically disabled for individual output channels operating in
Non-PCM format.
