Imagine HDX-6800+B4, Installation And Operation Manual, Page: 46 / 96

32 HDX6800
+
B2/C2 and HDX6800
+
B4/C4 Installation and Operation Manual
Chapter 2: Installation
Setting HDX6800
+
B2/C2 and HDX6800
+
B4/C4
Control Parameters
The following table lists all of the available parameters and options for
the HDX6800
+
B2/C2 and HDX6800
+
B4/C4. All parameters clip
unless otherwise indicated .
The On/Off combinations of the control LEDs on the card-edge indicate
the active bank number. See
“Changing Parameter Settings” on page 30
for more information.
Legend
Bold option = Indicates that this is the default setting for the parameter
[RO] = Indicates that parameters are read-only/feedback, and cannot be
used to select controls
* = Indicates that this parameter is only available on HDX6800
+
B2 and
HDX6800
+
B4 module versions
** = Indicates that this parameter is only available on HDX6800
+
B4
and HDX6800
+
C4 module versions
Superscript number
(1)
= Indicates that a footnote follows the table
Note
The sequence of options listed in the Options column mirrors the
sequence achieved when you move the Navigation Toggle switch
up. Parameters designated as read-only [RO] are only available
from a remote CCS software control application such as Pilot or
Navigator.