Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel
Reference
J/S (JSC-2) Ingest Control Panel
The jog/shuttle mechanism is a weighted jog wheel and a concentric shuttle ring.
20 control buttons
5 dedicated transport controls
A back-lit LCD time code display for easy and accurate editing.
V2.14 Firmware
The JSC-2 Ingest Panel uses firmware v2.14 to support jog/shuttle status query
commands.
Note
: Firmware versions prior to v2.14 do not support jog/shuttle querying and the
LCD display will appear to become unresponsive if left idle or in the ‘shuttle’ position
for a period of time. Moving the shuttle wheel or pressing any button on the control
panel will reupdate the display.
Specifications
The following table provides a brief list of specifications for a JSC-2 Panel.
Specification
Description
Size
10.5” x 6.5” x 3.5” (26.7 x 16.5 x 8.9)
Weight
4 lbs (1.8 KG)
Power Requirements
The JSC-2 comes with an external power supply ‘brick’:
(universal, 12 volt DC switching power supply). If you
need a power cord specific to your location, please
contact your local distributor.
Warning
:
Using a power supply other than the unit
specified can result in damage to the panel and/or other
equipment which is not covered by the manufactures
Warranty
.
Power Consumption
Vendor-specified power input and output information is
printed on the power supply label:
Power Input = 100-240V AC at 0.45A peak
Power Output = 12V DC at 1.25A max.
Inputs/Outputs
RS-422 (x1)
Typical Location
In close proximity to the operator workstation.
Mounting
Requirements
No mounting is required. Since this is a desktop unit,
only sufficient desk space is required.
© 2014 Imagine Communications Corp. Proprietary and Confidential
9-April-2014 | Page 8 of 21
