manualshive.com logo in svg

Image Engineering lightSTUDIO, User Manual, Page: 21 / 21

Share
Download
Image Engineering lightSTUDIO User Manual Download Page 21

 

  Copyright And Trademarks 

 

 

 

 

Image Engineering   

lightSTUDIO  

21 

* Redistributions in binary form must reproduce the above copyright notice, this 

  list of conditions and the following disclaimer in the documentation and/or other 

  materials provided with the distribution. 

* The name of the contributors may not be used to endorse or promote products 

  derived from this software without specific prior written permission. 

 

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 

ARE DISCLAIMED. 

IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY 

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 

(INCLUDING,BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 

LOSS OF USE,DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 

 

5.2  C

OPYRIGHT

 

I

NFORMATION

 

By  installing  this  software,  you  accept  and  agree  to  be  bound  by  the  terms  of  the  software  license 

agreement that appears below. 

 

Copyright © Image Engineering GmbH & Co. KG, 2017 

 

The software furnished under this agreement is provided on an ‘as is’ basis, without any warranties or 

representations express or implied, including, but not limited to, any implied warranties of 

merchantability or fitness for a particular purpose. It is solely the responsibility of the consumer to 

determine the software's suitability for a particular purpose or use. Image Engineering GmbH & Co. 

KG, and anyone else who has been involved in the creation, production, delivery, or support of this 

software, will in no event be liable for direct, indirect, special, consequential, or incidental damages 

resulting from any defect, error, or omission in the diskette or software or from any other events, 

including, but not limited to, any interruption of service, loss of profits or good will, legal action or any 

other consequential damages. the user assumes all responsibility arising from the use of this software, 

for which Image Engineering GmbH & Co. KG shall have no liability, regardless of whether such use is 

lawful or forseeable. Image Engineering GmbH & Co. KG shall have no liability for any data or 

programs stored by or used with this software, including the costs of recovering such data or 

programs. Image Engineering GmbH & Co. KG reserves the right to make corrections or 

improvements to the information provided and to the related software at any time, without notice. 

Summary of Contents for lightSTUDIO






















Reviews:

No comments