Software Documentation
Image Engineering
lightSTUDIO
15
4.5.2.2
R
OTATION
In the sequence table, movements for the rotating chart can be edited. There are three columns
available, the first contains the start times, the second the end times for a period of rotation and the
last column the velocity in revolutions per minute (RPM). The velocity must be in the range between
-360 and 360 RPM. Positive values let the plate rotate counter-clockwise, negative values clockwise.
The periods must not overlap in time and negative times are not allowed, a message dialog is
displayed if a time value entered is invalid. In order to insert a break of rotating, enter a later start time
for a specific period than the end-time of the precedent period. Inserting a row with velocity 0 has the
same effect.
4.5.2.3
I
Q-T
RIGGER
The iQ-Trigger device allows you to release your camera button with the software. You can release iQ-
Trigger with the
play/stop
button [1] depending on the settings in the options menu
(chapter 4.3.1)
in
one-shot, toggle or continuous mode. A status bar at the bottom displays the progress of the iQ-
Trigger in released state. In the sequence list time stamps for the release of iQ-Trigger can be edited.
At each time stamp iQ-Trigger is released for the time defined in the settings (
chapter 4.3.1
).
1