Perform Setup
24
Perform Setup
Activate the Setup Menu
To activate the setup menu proceed as follows:
➢
During the start sequence tap exact three times onto the touchscreen
(1).
✓
At the end of the start sequence the touchscreen shows the "Self
Test 1" screen.
Menu and Buttons
Name
SELF TEST 1
Menu name
IP ADDRESS
Button for network configuration
▲
Button to drive the document forward in the
scanner
WHITE BALANCE
Button for white balance
LAMP ON/OFF
Button for lamp test
▼
Button to drive the document backward in the
scanner (rewind)
EXIT SELFTEST
Button to leave the Self Test mode to the start
screen
> MORE
Button to switch to "Self Test 2" menu