Perform Setup
35
The white balance is used to ensure the quality of the scan results. The
white balance will be carried out using a test target. The test targets are
marked as follows:
•
WT36C-Z-01-A for WideTEK® 36DS
ATTENTION!
Impairment of the scan quality can occur if an improper
test target for the white balance is used.
➢
Make sure that the test target is free from wrinkles,
discolorations, cracks or other damage.
➢
Store the test target for the white balance in a safe place
protected from daylight.
To perform the white balance, proceed as follows:
➢
Position the supplied test target (1) in the document transport as
illustrated below (2).
The test target (1) is pulled into the scanner.
