Imada ZTS series, Instruction Manual

Page: 35 / 44

11 REFERENCE SECTION — PROGRAM MENU
3/6
page 36
Sound
Keypad Beep Factory Default=‘ON’
Beep confirms keys are pressed. Select: ON or OFF.
1. Turn ON the gauge, then press and hold
MENU
two seconds to
enter the Program Menu. Press the down arrow key to highlight
Sound, then press the right arrow key to select.
2. Keypad Beep is highlighted; press the right arrow key to select.
3. Press the up/down arrow keys to select and press
MENU
to
input your selection.
4. Press the left arrow key until the door icon
#
appears, then press
and hold
MENU
two seconds to exit. Or press the left arrow
key and when ‘Exit Menu’ appears, press
MENU
to exit.
High/Low Alarm Factory Default=‘OFF’
Beeps when high setpoint is exceeded. Select: ON or OFF.
1. Follow Keypad Beep step 1, above.
2. Press the up/down arrow keys to highlight High/Low Alarm and
press the right arrow key to select.
3. Press the up/down arrow keys to select and press
MENU
to
input your selection.
4. Press the left arrow key until the door icon
#
appears, then press
and hold
MENU
two seconds to exit. Or press the left arrow
key and when ‘Exit Menu’ appears, press
MENU
to exit.
5
Auto Zero Timer
Factory Default=‘OFF’
Automatically clears peak value. appears when set.
Select: 1~60 seconds or OFF.
1. Turn ON the gauge. Press and hold
MENU
two
seconds to enter the Program Menu. Press down arrow key to
highlight Auto Zero Timer, then press the right arrow key to select.
2. Press the up/down arrow keys to change the value and press
MENU
to input your selection.
3. Press the left arrow key until the door icon
#
appears, then press
and hold
MENU
two seconds to exit. Or press the left arrow
key and when ‘Exit Menu’ appears, press
MENU
to exit.
4
Program Menu
Internal Memory
# Auto Zero Timer >
Sound
Program Menu
Auto Zero Timer
# Sound >
Display Functions