Imada ZTS series, Instruction Manual

Page: 12 / 44

1. Press
ON/OFF
to turn on the gauge.
2. Press and hold the
MENU
key two seconds
to enter the Program Menu.
3. Press the up or down arrow keys to highlight
Internal Memory, then press the right arrow key.
4. Press the up or down arrow keys to highlight
Data Recall and press the right arrow key.
5. Press the up or down arrow keys to view
stored data. If no data is stored ‘–’ is displayed.
6. Press the left arrow key until the door icon
#
appears, then press and hold
MENU
two sec-
onds to exit. Or press the left arrow key and when ‘Exit Menu’
appears, press
MENU
to exit.
page 11
STORING AND COLLECTING DATA
Press
SEND
during measurement, in Peak or Real Time mode, to store
a value. Up to 1,000 force values may be stored in gauge memory.
Press
SEND
when gauge and PC are connected with included USB
cable and data is stored in gauge memory and transmitted to the PC.
Use included ZT Logger to collect and display force data (see page 20).
7
1. Recalling Stored Data
{ No. 23 }
6.0 N
<Back
Internal Memory
< Data Recall >
Data Delete
Program Menu
Peak Functions
# Internal Memory >
Auto Zero Timer
Last Data Delete
1. Follow Recalling Stored Data steps 1-3.
2. Highlight Data Delete and
press the right arrow key.
3. Press the up/down arrow keys
and select Last Data Delete.
4. The last data appears, press
the
MENU
key to delete it.
If no data is stored ‘–’ is
displayed.
5. Follow Recalling Stored Data
step 6 to exit the menu.
2. Clearing Stored Data
Internal Memory
Data Recall
< Data Delete >
Data Delete
{
Last Data Delete
<Back } Clear@
Data Delete
{
All Data Delete
<Back } Clear@
No. 23
6.0 N
<Back Clear@