Stand-alone (on location)
1. Follow the directions provided with your Camera Back Adapter Kit
to connect the adapter
A
to your camera back
B
, mount the
assembly on your camera body
C
, and attach a focusing screen.
Remember to keep the plastic CCD cover on when you are mounting
the adapter (see Figure 9 on page 45) but to take the cover off just
before mounting the camera back/adapter assembly on the camera.
Be sure to save the cover and place it on the camera back each time
you remove the back from your camera body.
2. Connect the camera link cable
D
from the camera back’s “Link”
connector to the “Link” connector on the Image Bank
E
.
Note!
Use the short “Link” cable.
3. Mount the battery
F
on the Image Bank.
See “Mounting/Dismounting the Battery” on page 33 for details.
4. If needed, attach a strobe lighting system to your camera body for
synchronizing flash and exposure. Make the connection just as you
would using normal film.
5. If necessary you can attach the Image Bank to your belt or pocket
using the Belt Clip
G
on the back side of the device.
6. Press the Image Bank’s On/Off button and wait until the unit is
ready (status indicator = green) - see page 32 for references.
User's Guide - Imacon Ixpress
English
Assembly and Use
41
Assembling the Ixpress System
F
C
E
D
G
A
B
Figure 8: Assembling the Ixpress System for stand-alone use
