Be sure to save the cover and place it on the camera back each time
you remove the back from your camera body.
2. Connect the camera link cable
D
from the camera back’s “Link”
connector to the “Link” connector on the Image Bank
E
.
Note!
Use the long “Link” cable.
3. Connect the FireWire cable
F
between the Image Bank’s FireWire
socket and the computer
G
.
Note!
If you are connecting the Image Bank to a computer (ex. a
laptop computer) which is incapable of supplying sufficient power
to the Image Bank, it will be necessary to mount the battery
H
as
well or to connect an external power supply unit
I
- see “Technical
Specifications” on page 49 for details.
4. If needed, attach a strobe lighting system to your camera body for
synchronizing flash and exposure. Make the connection just as you
would using normal film.
5. Switch on the computer
G
.
6. If you are using a battery press the Image Bank’s On/Off button and
wait until the unit is ready (status indicator = green) - see page 32 for
references.
7. Start the FlexColor application
K
.
See the
“FlexColor Software
Reference”
manual for instructions about
how to use the software.
User's Guide - Imacon Ixpress
English
Assembly and Use
40
Assembling the Ixpress System
