In the
Power Down...
entry you can set the time of inactivity after which
the Image Bank and camera back should automatically turn off.
To turn the units on again use the On/Off button on the Image Bank.
Basic System Set-up
Some parameters like camera model, exposure time and ISO value can
be adjusted either on the back itself or via the FlexColor user interface.
The settings are stored in the back. If you change any of these settings on
the back while working disconnected from the computer, FlexColor will
reflect these changes once the back is reconnected.
If you make the same changes in FlexColor while the back is not
connected it will have no effect.
User's Guide - Imacon Ixpress
English
The Ixpress Camera Back
28
Using the Control Panel
