Copyright©2005 ILY Enterprise, Inc. All rights reserved.
13
4.9.1 Load
Place the master DVD disc into the DVD-ROM or any one of the DVD writers, the duplicator
will detect and analyze the master DVD.
Here the function “Load” will allow you to load data
from the DVD-ROM or any DVD writer into the
current partition of the hard disc. P:A means Partition A.
Press ENT to load. The LCD will show the loading
information.
When the image has successfully loaded, the LCD
will show as the following screen:
If there is an image file existing in the current partition,
the system will ask whether you want to overwrite.
Use arrow button to make “Yes” or “No” selection.
4.9.2 Delete Image
If you want to empty an image file stored in a particular partition, you can use the function Delete
Image to do so.
Select function by pressing arrow.
The system will ask if you are sure you want to delete.
Use arrow button to make “Yes” or “No” selection.
When the image is successfully deleted from the
hard drive, the LCD will show the following message:
4.9.3 Image Info
This function shows the basic information of an image file stored in a particular partition.
Press ENT to show the disc information.
The LCD will show the total sessions and tracks
in the partition.
Press ENT again. The LCD will show
the total time and capacity in the hard drive of
partition.
9
-
01
.
Image P
:
A
Load
Load- A -24X 0%
650
.
0MB 74
:
00
Image load OK
Image Exists
Overwrite?Yes
9
-
02
.
Image P
:
A
Delete Image
Delete Image in
Partition A?Yes
Partition A:
Image is deleted
9
-
03
.
Image P
:
A
Image Info
Total 01 Sessions
Total 01 Tracks
Total
:
74:00
Total
:
650 MB
