ILX Lightwave FPM-8200, User Manual

Page: 61 / 96

G P I B C O M M A N D R E F E R E N C E
GPIB Command Reference
01_10 FPM-8200
45
C H A P T E R
4

Action Requests the contents of the condition status register.
Response
Notes The conditions reported to the status byte are set through the ENABle:COND command.
The condition status may be constantly changing, while the event status is only cleared when it is
cleared or read. See *CLS and EVEnt? commands.
See Chapter Three for more information about register structure.
Example COND?
—
Response = 8 under−range condition
Value range 1 to 65536
Action Delays processing of further commands for the defined time (in milliseconds).
Notes Decimal values are rounded.
Small delay values may have no effect, because of time required for command processing. The
actual minimum delay depends on the situation, for example whether a measurement is being done
in background.
The operation−complete flag is false until the delay time elapses.
This delay command can be useful for creating delays based on the FPM−8200 clock rather than
using the controller’s clock.
Examples DELAY 2000
—
Delay further processing 2 seconds.
DELAY 48.2
—
Delay further processing 48 milliseconds.
COND?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
DELAY <nrf value> C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
Over-range
Numeric
Value:
Under-range
Ready for calibration data
Calculation error
Hardware error
Software error
= Unused bits
4
8
2048
4096
8192
16348