22
The induction hob may remain hot for a long time after use due to heat transferred
from the pans. Do not touch the hob with your hands or let children near it. The resi-
dual heat indicator will remain on until the hob has cooled down.
If any cracks appear in the ceramic induction hob, disconnect the appliance immedia-
tely from the mains and call an authorized technical service centre.
The positions are clearly indicated by the rings.
Area Diameter Ø Power
P1 180 mm 1800 W
P2 180 mm 1800 W
Heat zones are clearly indicated by these circular areas. When one or more cooking
areas are being used, the remaining surface stays cold. Each cooking area is designed
to work with the cookware specific for induction cooking, with a diameter just less than
the diameter of the selected cooking area.
The bottom of the pan must be thick and flat. Its diameter must be as similar as possible
to that of the cooking ring. The surface of the hob and the bottom of the pan must be
kept clean.
• Do not wet or overheat the heating plates.
• Avoid sudden changes in temperature on the ceramic hob. For example, do not
pour cold water onto the hot hob.
• Do not leave the pan handles sticking out as they could be spilled accidentally.
• Do not to cook on the ceramic hob with pans that have been used on gas burners.
The flames may have deformed the bottom of the pans and could damage the
induction hob.
The cooling fan is completely automatic. When the hob is used for long periods the
speed of the cooling fan increases. When the electronics are cool the cooling fan
stops.
2 ZONE INDUCTION
ATTENTION!
Precautions to avoid
damaging the appliance
Ventilation
INSTRUCTIONS FOR USE
Use of the 2 Zone Induction
P1
P2