ILVE MAJESTIC MILANO 06, Installation Manual

Page: 13 / 36

13
Adjustments
Burners on the hob
Burners in the gas oven
When installing the cooker, you must check that the minimum gas flow of the burners on
the hob and in the oven is correctly regulated.
If the type of gas is changed, the low flame jet will require adjustment. The adjustment
procedure is as follows:
1. Light one burner at a time and turn the flame
up to maximum.
2. Remove the knob of the corresponding gas
tap and insert a screwdriver in the end part of
the tap or in the screw (fig. A1,A2).
3. Turn the tap to minimum position.
4. Unscrew, turning to the left, to increase the
flame, or screw to the right to decrease it.
5. If a liquid gas is used (Butane - Propane), the
regulating screw must be fully screwed in.
1. Remove the bottom shelf of the oven.
2. Light the burner and leave it at maximum for
about 10minutes with the oven door closed.
3. Turn the knob to minimum and, still with the-
door closed, check whether the flames have
lowered but are still burning steadily (about 3-4
mm).
4. Remove the knob of the thermostat. Insert
a screwdriver on the proper screw (fig. B):
turn anti-clockwise to increase the minimum,
clockwise to decrease it. The flame must be
steady and homogeneous.
5. If the flames are not well adjusted at minimum
level,repeat the procedure described above.
6. If a liquid gas is used (Butane - Propane), the
regulating screw must be fully screwed in.
ADJUSTMENTS
Adjustments minimun GAS flow
Fig. C2