ILVE ILEM46, Instruction Manual, Page: 6 / 33

EN
5
Installing the appliance
IMPORTANT!
• Installation must be performed by a qualified professional
in compliance with legislation in force in the country of
installation (see section “Built-in installation”).
• The packing elements (plastic bags, polystyrene foam,
etc.) should be kept out of reach of children.
• Never install the appliance in rooms where the
temperature may drop to 0°C or lower.
• Customise the water hardness as soon as possible
following the instructions in the “Water hardness”
section.
Connecting the appliance
DANGER!
Check that the mains power supply voltage corresponds
to the value indicated on the rating plate on the side of
the appliance.
Connect the appliance to an efficiently earthed and
correctly installed socket with a minimum current rating
of 10A only.
If the power socket does not match the plug on the
appliance, have the socket replaced with a suitable
type by a qualified professional. To comply with safety
directives, an omnipolar switch with a minimum contact
distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
IMPORTANT!
Safety cutout devices must be included in the mains power
supply in compliance with the installation regulations in
the country concerned.
This appliance conforms to EC Regulation 1935/2004
on materials and articles intended to come into contact with
food.
Disposal
The appliance must not be disposed of with household
waste, but taken to an authorised waste separation and
recycling centre.