background image

EN

15

8 - Changing the quantity of coffee in the cup

9 - Adjusting the coffee mill

The appliance is set by default to automatically make the 

following types of coffee:
• espresso
• small cup
• medium cup
• large cup
• mug

To change the quantity, proceed as follows:
• Press the 

 icon (B2) to enter the menu (fig. 15). Press 

the 

  icons  (B7)  and  (B8)  (fig.  2)  until  “PROGRAM 

COFFEE” is displayed.

• Press the OK icon (B9).

• Select the type of coffee you want to change by pressing 

the 

 icons (B7) and (B8). 

• Press the OK icon (B9) to confirm the type of coffee you 

want to make. 

• Use the 

  icons (B7) and (B8) to change the quantity 

of coffee. The progress bar shows the quantity of coffee 

selected. 

• Press the OK icon (B9) again to confirm (or the icon (B6) 

to cancel the operation).

• Press the   (B6) icon (B6) (fig. 18) twice to exit the menu.

The appliance is now reprogrammed with the new settings 

and is ready.

The coffee mill is preset in the factory and should not require 

adjusting. However, if after making the first few coffees you 

find that delivery is either too fast or too slow (a drop at 

a  time),  this  can  be  corrected  by  adjusting  the  grinding 

adjustment knob (fig. 14).

IMPORTANT!

The grinding adjustment knob must only be turned when 

the coffee mill is in operation.

For  slower  delivery  and  creamier  coffee,  turn  one  click 

anticlockwise (finer pre-ground coffee).

For  faster  delivery  (not  a  drop  at  a  time),  turn  one  click 

clockwise (coarser pre-ground coffee).

Summary of Contents for ILEM46


































Reviews: