background image

EN

17

14 - Making cappuccino

N.B.: 

Set  the  quantity  of  coffee  you  want  to  use  to  make  the 

cappuccino in the “Program cappuccino” function in the 

menu.

• Select the taste of the coffee you want to use to make the 

cappuccino by pressing the   icon (B4).

• Remove the lid of the milk container.
• Fill the container with about 100 grams of milk for each 

cappuccino to be prepared (fig. 23). Never exceed the 

MAX level (corresponding to about 750 ml) marked on 

the  container.  You  should  ideally  use  skimmed  or  semi-

skimmed milk at refrigerator temperature (about 5°C).

• Make  sure  the  intake  tube  is  correctly  inserted  in  the 

rubber washer (fig. 24) then replace the milk container 

lid. 

• Position the frothed milk regulator (C1) between the words 

CAPPUCCINO  and  CAFFELATTE  printed  on  the  milk 

container  lid.  The  quantity  of  froth  can  be  adjusted  by 

moving the regulator towards the word CAFFELATTE for a 

denser froth. Moving it towards the word CAPPUCCINO 

obtains a less dense froth.

NO froth

“Denser” froth

frothed milk regulator

“Less dense” froth

• Remove  the  hot  water  spout  (fig  6)  and  attach  the  milk 

container to the nozzle (fig. 25).

• Position the milk spout as shown in fig. 26 and then place 

a sufficiently large cup under the coffee and milk spouts.

• Press  the 

  icon  (fig.  B12).  “CAPPUCCINO...”  is 

displayed  and  after  a  few  seconds,  frothed  milk  flows 

out of the milk spout into the cup below. (La fuoriuscita 

del latte si interrompe automaticamente). (Delivery stops 

automatically).

• The appliance delivers coffee.
• The  cappuccino  is  now  ready.  Sweeten  to  taste  and,  if 

desired, sprinkle the froth with a little cocoa powder.

NOTE 1:  While  making  cappuccino,  the  flow  of  frothed 

milk or coffee can be interrupted by pressing the 

 icon (B12).

NOTE 2:  If the milk in the container finishes while delivering 

frothed milk, remove the container and add milk.  

Reattach  and  press  the   

  (B12)  to  request  a 

cappuccino again. 

NOTE 3:  To ensure the complete cleanliness and hygiene 

of the milk frother, always clean the circuits in the 

milk container lid after making cappuccino. 

“PRESS CLEAN!” flashes on the display.
• Place a recipient under the milk spout (fig. 26).
• Press the CLEAN button on the lid (C3) and hold down for 

at least 5 seconds (fig. 26) to start the cleaning function. 

The appliance displays the message “CLEANING!” above 

a  progressive  bar.  You  should  not  release  the  CLEAN 

button until the bar is complete indicating that cleaning 

is  concluded.  When  the  CLEAN  button  is  released,  the 

function stops. After cleaning, remove the milk container 

and place in the refrigerator. The milk should not be left 

out of the refrigerator for more than 15 minutes.

NOTE 4:  To change the quantity of coffee or frothed milk 

the appliance delivers automatically into the cup, 

proceed as described in the section “Changing 

the quantity of coffee and milk for cappuccino”. 

Summary of Contents for ILEM46


































Reviews: