background image

Ilumiline 36 IP Optic RGB QRG 

 

About this 

Guide 

 

The Ilumiline 36 IP Optic RGB Quick Reference Guide (QRG) only 
contains the product’s connection, and mounting information, as well as the 
menu options and the DMX values.  

  

 

Disclaimer 

 

Refer to this product’s User Manual for detailed information and 
instructions. You can download the User Manual from the ILUMINARC 
website

www.iluminarc.com

Read ALL the disclaimers and Safety Notes in this document, as well as 
those in the product’s User Manual before installing, operating, and 
maintaining this product. 

  

 

Safety Notes

 

 

 

DO NOT open the product unless instructed. It contains no user 
serviceable parts. 

 

DO NOT look at the light source when the product is on.

 

 

DO NOT touch the product when operating because it may be hot.

 

 

DO NOT leave any flammable material within 50 cm from the product 
while operating or connected to the power outlet to minimize the risk of 
fire.

 

 

DO NOT mount the product overhead without using a safety cable.

 

 

DO NOT submerge this product (IP66). Regular outdoor operation is 
fine.

 

 

DO NOT operate the product if you see damage on the housing, lenses, 
or cables. Have an authorized technician replace the damaged parts.

 

 

DO NOT connect the product to a dimmer or rheostat.

 

 

ONLY connect the product to a grounded and protected circuit.

 

  

 

What Is 

Included 

 

 

One Ilumiline 36 IP Optic RGB 

 

One Power Input Cable (bare-ended) 

 

One Data Input/Output Cable (bare-ended) 

 

One Warranty Card 

 

One Quick Reference Guide 

 

 

 

The RDM2go, which includes a built in ilumicode addresser along 
with many other useful features is now available. 

 

The Ilumicoode addresser is required for product configuration 
(sold separately). 

 

 

Summary of Contents for Ilumiline 36 IP Optic RGB













Reviews: