7
1
6
1-877-540-5588
iluminarlighting.com
HANGING INSTALLATION
DAISY CHAIN CONNECTIONS
If you plan to utilize several LEDs in your room or facility, one of the many
benefits of the ILUMINAR LED is that you can “daisy chain” one fixture to
another to save space and use only one outlet to run several lamps, thus
minimizing the amount of cords used in your space.
If you plan to utilize the TOUCH Controller or ILUMINAR HASH
Controller, you can connect the yellow connections from the controller
to the fixture and then connect the Daisy Chain Controller Cable from
fixture to fixture. Please consult with our lighting layout designers to
ensure proper spacing of outlets for your unique setup.
!
A/C 100-277V
50/60 Hz INPUT
(to power outlet)
Yellow Tip
Controller Cable
(to Controller)
Controller Cable
Daisy Chain
(yellow)
A/C Daisy
Chain Cable
(blue)
Controller Cable
Daisy Chain
(yellow)
!
NEVER attach two AC input plugs. Safely
install only one AC Power Cable.
Attached the secure hooks to the fixture.
Loop the hanging wire as shown around the support beam (as shown
in Figure A). Press down at base of hook to slide to adjust the mounting
height of the fixture (Figure B).
!
NEVER attach two AC input plugs. Safely
install only one AC Power Cable.
One side only used
to Daisy Chain
power to fixture 2.
Once fixture is hanging with all LED bars installed, connect the power
cable (blue tip) from the outlet to one side of the fixture. DO NOT EVER
connect two power cables from the wall to the fixture.
AC 100-277V
50/60 Hz INPUT
1
2
3
FIGURE A
FIGURE B
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
