Splicing Operation
Swift F1
Quick Reference Guide
Step
Description
Procedure
1
Turn the F1 on
Press and The POWER button 1 time.
Home screen will be displayed when all motors
are reset to their initial positions.
Select a proper splice mode for exact splicing.
The current splice mode is displayed in the
2
Select Splice
Mode
and Heater Mode
The current splice mode is displayed in the
home screen.
Select heater mode.
The current heater mode is displayed on the
home screen.
3
Inserting Sleeve
Tube &
Connector Boot
Installing Holder
Insert the sleeve tube and boot part (when
splice fiber to connector) into the fiber.
FOR FERRULE, TAKE OFF THE ORIGINAL CAP,
THAN INSERT THE FERRULE CAP
.
Install the fiber or ferrule into the proper fiber
holder.
(250㎛, 900㎛, 2.5㎛, and Ferrule type holders)
Sleeve Tube Fiber
Ferrule Ferrule Cap
yp
4
Stripping
Operation
Warm up stripper heater. First close holder
part cover after mounting the fiber holder
onto the Auto stripper.
SECOND, SLAM THE
HEATER PART COVER IN ORDER TO FIRMLY
STRIP COATING WITH BLADES
. The fiber is
heated up and the coating is automatically
stripped by moving the slide. When process is
completed,
FIRST SOFTLY OPEN HOLDER PART
COVER, AND DETACH FIBER HOLDER
. Open
heater part cover, remove remaining coating
and brush for next operation.
CAREFULLY
HANDLING BLADE PARTS FOR STRIPPING
HANDLING BLADE PARTS. FOR STRIPPING
TEMPERATURE BETTER SET BETWEEN 75℃ to
80℃
.
5
Cleaning
Operation
Discharge alcohol by pressing 2 or 3 times with
a cleaning wipe by hand.
BE CAREFUL NOT TO
WET THE EQUIPMENT
.
Contact :
Contact :
/ +82
/ +82--42
42--671
671--5609~11
5609~11