Error Messages
Swift F1
Quick Reference Guide
Symptom
Cause
Solution
Clad
Deviation
Dust in V-Groove or
the chip of core wire
guide.
Cleaning V-Groove
or the chip of core
wire guide.
Clad Angle
Dust in V-Groove or
the chip of core wire
guide.
Cleaning V-Groove
or the chip of core
wire guide.
Symptom
Cause
Solution
Bubble
Bad condition of the
cross section of
fiber.
Checking whether
fiber cleaver is
working properly.
Too low amount or
short time of initial
arc discharge.
Increase the amount
and/or time of initial
are discharge.
g
g
g
Bad condition of the
cross section of fiber.
Checking whether
fiber cleaver is
working properly.
Clad
Deformation
Bad condition of the
cross section of fiber.
Checking whether
fiber cleaver is
working properly.
Too low amount or
short time of initial
arc discharge
Increasing the
amount and time of
initial arc discharge.
Ch ki
h th
Separation
Too high amount or
long time of initial
arc discharge.
Increase overlapping.
Decreasing the
amount and/or time
of initial arc
discharge.
Thick
Too long fiber
length.
Reducing the length
of duplicated area.
Clad Flexion
Bad condition of the
cross section of fiber.
Checking whether
fiber cleaver is
working properly.
Too low amount or
short time of initial
arc discharge.
Increase the amount
and time of initial
arc discharge.
Burning
Bad condition of the
cross section of
fiber.
Checking whether
fiber cleaver is
working properly.
Dust still remaining
after cleaning the
Cleaning carefully
the fiber or
Thin
Improper discharge
amount.
Conducting
discharge amount
calibration
A few improper
discharge factors.
Adjusting initial
discharge amount,
initial discharge time
and overlapped area.
Line
Several number of
improper discharge
Adjusting initial
discharge amount,
initial discharge time
after cleaning the
fiber or conducting
cleaning discharge.
the fiber or
increasing the arc
discharge time.
p p
g
factors.
initial discharge time
and overlapped area.
Contact ILSINTECH
Add:
#703 Gwanpyeong-dong Yusung-gu
Daejeon 305-509 Korea
Contact :
Contact :
/ +82
/ +82--42
42--671
671--5609~11
5609~11
Daejeon 305 509, Korea
Tel:
+82-42-671-5609~11
Fax:
+82-42-671-5612
E-mail:
www.ilsintech.com