Body Appearance & How to use Keypad
Swift F1
Quick Reference Guide
Cleaner
Auto Stripper
Sleeve Heater
Cleaver with Fiber Chip Collector
Splicer
Power Button
LCD Monitor
Reset / Return Button
Wind Protector
Cursor Buttons
Enter & Menu Button
Auto Stripper Button
(Start Heating)
Arc Button
(Start Splicing)
Sleeve Heater Button
(Start Heating)
Battery Pack
Battery Indicator Button
Remaining Battery Indicator LED
USB Port
Esc Button
Power Supply
Power Requirements
•
AC power supply for the specified
Charging the Battery
•
When charging, LED light blinks
Red→
Green→Yellow
.
•
Full charging the batteries take
approx. 2 hours.
•
Power Indicator LED
LED light turns:
DC-DC Adaptor (Option)
Battery
Pack
F1-2
Charger
AC-DC
Adaptor
AC Code
Battery Capacity Check
•
Remaining battery capacity is
displayed on both the top right
corner of the Monitor and the
AC power supply for the specified
charger is AC 100-240V, 50-60Hz.
•
Do not use AC power other than
the allowable power indicated
.
•
Do not use a battery charger other
than the specified charger provided
with product
.
•
The LED light turns
Red→Green→
No Light
(F1-2 Charger).
•
Auto shutoff devices are built in the
batteries to prevent over arc, over
charge and overload.
When these protection functions
Red→Green→Yellow
DC DC Adaptor (Option)
•
Connect the DC cord of the charger to
Adaptor.
•
DC adaptor charged while operating
and plugged.
•
Only one Plug-in (Right Side Adapter)
DC-DC
Adaptor
battery indicator LED
Contact :
Contact :
/ +82
/ +82--42
42--671
671--5609~11
5609~11
are performed, power is automatically
shutoff.
