Page 5 of 7
5. REMOVING AND INSTALLING THE OUTSIDE KNOB
In some installation locations it is necessary to remove the outside knob from the lock cylinder.
Follow these instructions to remove the knob. Re-installing with the same instructions in the
opposite order. Be careful when inserting knob not to break the connections on the cylinder. The
removal of the knob is only possible for people who have access rights for the cylinder.
A. Insert a key with access into the lock cylinder. Turn the key about 15 degrees clockwise.
B. By turning the key, the blocker hatch will open automatically at the bottom of the outside
knob. The hatch protects the fixing screw for unauthorized access.
C. Use Torx 6 tool to open the screw that holds cover cup, turn the Torx tool counterclockwise.
D. Remove the cover cup.
E. Remove the side screw and carefully detach the knob with the PCB.
F. Remove the back-plate screw with a Torx 6 tool (not necessary to screw them completely
out).
G. Remove the backplate by rotating it counterclockwise
.
A
15°
D
C
B.
F.
E
F
G