background image

 

1. 

If the water source to the machine has been shut off, 

turn the water ON  

       before powering up the machine.     

 

          NOTE: If the Machine has been off for more than 30 days  the filtration may need to be replaced 

2.   Once the water source has been turned on, proceed to turn on the main power                                                

on the coffee machine

. Depending on the size of your machine it will take 15-30 minutes                                       

the machine to heat up.  The machine will have a ready light or indicate on the display                                            

when it is ready                                       

3.  Remove the brew basket and clean with hot water and a 2 Tabz® or 2 tsp. of Cafiza®                                          to 

remove any residue 

4.  Put 1 Tabz® or 1tsp of Cafiza® into the brew basket (s) and slide it back on the Machine 

 
5.   While the machine is heating;  open the thermal servers and inspect each one.                                                             

Make sure they are empty. If there is any remaining coffee discard it.  

6.  When the machine is heated place the thermal server under the brew basket and run                                                                  

full brew cycle. 

(if it is a dual brewer run both sides)  

 

7. 

When the cycle is finished, empty the server 

through the tap  

 

8. 

Repeat steps 6 and 7 for each server

. Inspect the inside of each server, if there is                                                    

significant black residue in the server, 

go to step A

.  

If not

skip to step B

 

a. 

Repeat step 6, 

and let the server sit for 15 minutes. After 15 minutes, scrub the inside with                                                     

a bottle brush, empty the water and rinse thoroughly.  

b.

If the server is clean

, rinse thoroughly.  

9. 

Remove the brew basket (s) and rinse thoroughly

 

10. With the brew baskets removed, wipe down the spray head area with a clean damp cloth. 

 

11. Wipe down the exterior of the machine 

 

12. Prepare a full Batch of coffee and taste. (see Preparation Guide) 

     NOTE: if using beans and a grinder;  

Before making coffee

first refer to the                                               

‘Reopening with Filter Coffee Grinder’ document  on the following page. 

 

 

If  you experience any technical problems, please contact Illy Caffe Technical Service  at 1(800) 872-4559 to 
initiate a service call. One of our team members will contact you to troubleshoot  the issue

 

 

 

RESTART:  FILTER COFFEE MACHINE 

©2020 ICNA Inc. This manual/document and its contents are the property of illy caffè North America Inc. and its parent company, Illycaffè S.p.A 

This information is not to be distributed, modified or copied without express written permission of Illycaffè.  

 

Check that you have all the appropriate supplies: Large bottle brush, clean towels, Urnex Cafiza®               

Summary of Contents for BUNN AXIOM










Reviews: