IJ4000 Impulse Jet
Section 3: Maintenance and Shutdowns
5765-018 Operations Manual Rev J
Page 33
S
MART
-
IDS Maintenance
Changing Ink Containers
CAUTION:
Replace ink with ScanTrue II® ink only.
The Ink Status Beacon illuminates when the ink bottle is empty, and the pump is disabled. This alerts the operator to ready a new bottle of ink,
and allows the operator at least five minutes to change the bottle before printing is disabled. If the ink bottle is not replaced within five minutes,
print will be disabled on all "Tasks" and the beacon will flash slowly.
Shutdowns of 1 Week to 3 Months
During planned shutdown periods of 1 week to 3 months, as well as when storing spare print heads:
1. Remove the ink bottle, close the reservoir vent cap, and install the reservoir ship cap.
Shutdowns of 3 Months or More
1. Follow the recommendations of Shutdowns of 1 Week to 3 Months.
2. It is recommended that the print head system be flushed with ScanTrue Flush Solution and that ScanTrue Flush Solution be left in the print
head and S
MART
-IDS during the storage period. (See “Consumables” on page 77 for part numbers.) Follow instructions in document
5760891N. Flush Solution can remain in the print head for one year from the date of flushing.
Annually
Replace the vent filter on the S
MART
-IDS.
!
