background image

SECTION 9  Warranty 
 

SIMCO warrants its products to be free of defects in components, workmanship, or 
materials for a period of one year from date of purchase.  This warranty does not apply 
to any physical or electrical damage caused by misuse, abuse or negligence (such as 
any modifications made to the unit or service work done by any other than SIMCO 
authorized technicians). Any unit with altered or removed serial number is ineligible for 
warranty. 
 
SIMCO will not be liable for loss or damage due directly or indirectly to an occurrence 
or use for which the product is not designed or intended.  In no event shall SIMCO be 
liable for incidental or consequential damages except where state laws override. 
 
This warranty extends to the original purchaser and is not transferable.  No person, 
agent, distributor, dealer or company is authorized to change, modify, or amend the 
terms of this warranty in any manner whatsoever. 
 
All products returned must have an “RA” (Return Authorization) number regardless of 
warranty status.  Call SIMCO for an assigned RA number. 
 
Information in this document is subject to change without notice and does not represent 
a commitment on the part of SIMCO.  No part of this manual may be reproduced or 
transmitted in any form or by any means, electronic or mechanical, including 
photocopying and recording, for any purpose other than the purchaser’s personal use 
without written permission of SIMCO. 

 

 

 

 

2257 North Penn Road 

Hatfield, PA 19440 

Phone:  (215) 997-0590 

(800) 538-0750 

Fax:  (215) 997-3450 

 

http://www.simco-static.com

 

e-mail: [email protected] 

 

 

10 

Summary of Contents for 4002612











Reviews:

Related manuals for 4002612