MicroSD Memory Card
1. Load a MicroSD
memory card into the
MicroSD memory card
port. The speaker will
automatically switch to
SD Card Mode, indicated
by a voice prompt, and
begin playing media on
the card.
2. Use the controls on the
speaker to play, pause,
and skip audio on the card.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: [email protected]
Copyright © 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm
audio cable to the Aux
In on the unit and the
audio output/
headphone jack on
an audio device.
2. Press Source to switch
to Aux Mode.
3. Use the controls on the
connected device to
select and play audio.
Be sure the volume on
your connected device
is audible when you
begin playing.
USB
1. Load a USB drive
into the USB Media
port. The speaker will
automatically switch to
USB Mode, indicated
by a voice prompt, and
begin playing media on
the drive.
2. Use the controls on the
speaker to select and
play audio from the
connected drive.
FM Radio
Radio Reception
An FM receiver is built into the speaker. Adjust the position of the speaker to
improve FM radio reception.
Radio Tuning and Saving Station Presets
1. Press the Source button to select FM Radio Mode, indicated by a voice
prompt.
2. Press and hold the
button to scan and save radio stations automatically.
3. Press and hold the
buttons to cycle through saved radio stations.
Charging the Battery
To charge the internal battery, plug the USB charging cable into the DC Power
Input on the speaker and a powered on computer or USB power adapter (not
included) and standard power outlet. Charging time is approximately 2.5 hours.
Battery life is approximately 3 hours. Battery life can be extended by playing at
lower volume levels.
Bluetooth Wireless
Pairing & Playing Audio
When first powered on, the speaker defaults to Bluetooth Mode, indicated by a
voice prompt. All other play modes will change automatically when connected to
the different audio sources.
1. Power on the speaker by adjusting the Power Switch to the ON or LIGHTS
position. The speaker defaults to Bluetooth Mode and is ready to pair
automatically. When pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select ISB199 in the Bluetooth
Settings to pair. If need be, refer to the user’s manual for your specific device
for more information.
3. When successfully paired, a voice will announce, “Bluetooth is connected.”
Your Bluetooth device will now be heard through the speaker.
4. Use the controls on the connected Bluetooth device to select and play
audio. Use the speaker controls or the connected Bluetooth device to play,
pause, and adjust the volume level.
5. After initial pairing, the speaker will automatically connect to the last
Bluetooth device used whenever it is in Bluetooth Mode. Note: If your
device should become unpaired or you find it is unable to connect, press
& hold the button to enter to Pairing Mode. A voice will announce,
“Bluetooth is connecting,” and you can connect to the speaker manually.
