11
Loading and Playing a DVD/CD
Note: This unit is not compatible with MP3 CDs.
1. Press the Source button to select "DVD".
2. Press the open/close button to open the Disc Tray and place a disc into the tray, label side facing up.
3. Press the open/close button to close the Disc Tray
4. Use the controls on the remote or the unit to play, pause, adjust volume, etc.
DVD & CD
Programming a DVD or CD
1. While a DVD or CD is playing, press the Program button on the remote.
2. Using the Number Keypad enter in the chapters or tracks in the order you want them to play.
3. Highlight the on-screen Play button using the Arrow buttons and press OK.
4. The programmed chapters and tracks will now play in the designated order.
5. To cancel a program, press the Stop button twice.
Setting the Clock
1. With the power off, press and hold the Clk Set/Mem button. The hour on the display will begin flashing.
2. Press the Skip/Tune buttons to set the hour.
3. Press the Clk Set button again, the minutes on the display will begin flashing.
4. Press the Skip/Tune buttons to set the minutes.
5. Press the Clk Set button to finish setting the time, or wait for the display to stop flashing.
Disabling the Timer
To cancel the alarm after it has sounded, press the Power button.
To cancel the timer before the alarm has sounded, press the Timer button until the display reads 00 and the timer
light is no longer lit.
Setting the Timer
1. Press the Timer buttons to adjust the timer in increments of 10 min.
2. Wait for the display to stop flashing.
3. After the set time has expired, the under cabinet music system will sound an alarm.
Clock & Timer