Ilford ILFOLAB 2150RC, Operating Manual

Page: 15 / 48

3.4b
3.5
1
2
3
4
5
12
CAUTION
To prevent air locks and consequential flooding of the wash
water tank, ensure all drains fall continuously to the service
drain.
When using the drain manifold, drain each tank separately and
always drain the fixer before the developer.
Water supply
Note
The processor automatically regulates the flow of water at all
times.
Secure the water pressure pipe supplied to the processor water
supply connection by tightening the outer ring.
If the water supply contains a high proportion of suspended
solids, connect the water supply via a filter unit.
DRYER
See figure 3.2.
Position the dryer on the processor lid, with the paper feed end
of the dryer facing towards the rear of the processor.
Align the holes in the base of the dryer with the holes in the
processor lid.
Carefully open and support the processor lid.
Secure the dryer by inserting the two fixing screws from the
underside of the processor lid.
Plug the dryer into the power socket (marked ‘dryer’) at the rear
of the processor.
WARNING
Do not plug the dryer into any other power supply. The
processor socket is wired via the processor lid interlock, ensuring
the dryer heaters are automatically switched off when the
processor lid is raised.