Ilford ILFOLAB 2150RC, Operating Manual

Page: 10 / 48

6
7
7
Water feed button
See figure 2.2.
Located on the processor to the right of the front tanks under the
processor lid. The water feed button controls the water supply for
diluting chemical concentrates, and for rinsing the processor.
Audible signals
There are four different signals:
Feed indicator
A single audible signal is made indicating the processor is ready
to accept the next sheet. This signal is synchronised with the
‘ready’ light (see 3 ‘Ready’ light).
Incorrect feed
A continuous audible signal is made lasting the length of a sheet.
This signal indicates that a sheet has been fed before the ‘ready’
light has stopped flashing (see 3 ‘Ready’ light).
Rinsing cycle complete
Three audible signals are made indicating the rinsing cycle is
complete (see section 7).
Warning indicator
A series of audible signals are made. The warning signal sounds
if the processor lid remains open 30 seconds after pressing the
water feed button, or if the solution level in either of the front
tanks is low. If left unchecked, the signal continues for three
minutes and the processor is then automatically switched off.
IL181
Figure 2.2
Water feed button