18
WEP security type: developing system, sharing key and auto-selection
WPA, WPA2 security type: TKIP and AES
(8) Set key (authentication key)
123 is the login SSID number of Wi-Fi for identity authentication
Check this option to enable Wi-Fi function
Security setting is the password for identity authentication; the password is empty if this option is not checked
3 The Wi-Fi function settings of INC-M20xx:
(1) Wireless network on/off
Select this switch will enable Wi-Fi function of INC-M20xx.
(2) IP address
Set the wireless IP address of INC-M20xx, e.g. 192.168.1.160.
(3) Gateway
Set the IP address of current wireless gateway, e.g. 192.168.1.1.
(4) SSID number:
It is the login name of Wi-Fi for identity authentication; it must be the same as the SSID number of the wireless router (e.g. 123).
(5) Password
It is the login name of Wi-Fi for identity authentication; it must be the same as the key of the wireless gateway (router/AP).
(6) Master authentication encryption type
Three encryption types are WEP, WPA and WPA2. Its selection must be the same as the security type setting of wireless gateway (router/AP).
(7) Auxiliary encryption mode
WEP encryption type: developing system, sharing key and auto-selection;
WPA, WPA2 encryption type: TKIP and AES
It must be the same as the security option setting of wireless gateway (router/AP).
After setting completes, save all parameters. Then disconnect the network cable, INC-M20xx can be visited via wireless IP, such as 192.168.1.160.
Note:
The wireless network IP address and cable network IP address cannot be in the same segment.
The Wi-Fi switch appears to be grey when INC-M20xx doesn't have Wi-Fi function.
[UPNP setting]
Auto mapping of port, when there is server with UPNP function in the LAN, server will map the port to WAN automatically upon starting of this function.
