Setup at PC end
Step 1: Setup Modem used on PC side.
Use DCE cable to connect Modem with PC serial port. You can use HyperTerminal or NetTerm to setup modem:
AT&F ---- Restore default parameters (Generally, Modem is hard flow control)
AT&W&W1 ---- Save parameters
Step 2: Setup “Network and Dial-up Connection”
Open “Network and Dial-up Connections” in control panel, then press “New Connection…”, select “Dial-up to private network” according to the guide. Select the
corresponding MODEM, input the telephone number to be dialed in the next step, finish it according to the guide. At this time, you will find a new program named
“Dial-up Connection” in “Network and Dial-up Connections” folder.
Setup should be specially pay attention to:
Open the properties of the new-established dialup program, select “Advanced” (custom settings) in
security option, press setup, set it in the popup dialogue box that is “Advanced Security Settings” as follows:
____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
[
57
]