Doc ID:IKUSI OP-13TX Optical Transmitter User Manual V1
Page
9
of
13
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
02-May-2018
3.1 The operation of the panel
3.1.1 Open Description
A.
Plug in 240V city power supply
B.
Turn on power switch in the rear panel
In order to protect the laser, there is time-delay function, after turning on with the Laser
switch; the laser will start to work after 10 seconds. Indication light turns Green from Red,
machine enters self-checking, after checking it enters working status, display “OP-13Tx -
show parameters”.
Front panel display “OP-13Tx >Key OFF!” (laser switch OFF)
Laser
Status lamp red
TEMP
Status lamp green
POWER Status lamp green
POWER2 Status lamp green
C.
Press laser switch to on position
Front panel displays KEY ON……
，
Laser status lamp turn green.
