Doc ID:IKUSI OP-13TX Optical Transmitter User Manual V1
Page
10
of
13
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
02-May-2018
3.1.2 Start-up main menu
Press ▲\▼ button will display below menu in sequence.
Menu # 1 -
LD S/N
Read-only menu, displays the serial-number
Menu # 2 -
OUTPUT
Read-only menu, displays the optical output power in dBm
Menu # 3 -
LASER CURRENT
Read-only menu, displays the laser of current in mA
Menu # 4 -
LASER TEMP
Read-only menu, displays the laser temperature in °C
Menu # 5 -
TEC COOLING/HEATING
Read-only menu, displays the amount of current that the Thermoelectric Cooler
requires to maintain the laser temperature at nominal 25 °C
Menu # 6 -
RF MODE
Current RF mode, display AGC/MGC
If it appears RF Mode = AGC, while it was in the select of AGC
If it appears RF Mode = MGC, while it was in the select of MGC
Menu # 7 -
RF LVL
Read-only menu, tells the RF input level
Menu # 8 -
UNIT TEMP
Read-only menu, tells the system temperature
Menu # 9 -
+5V Monitor
Read-only menu, display the v5V
Menu # 10 -
-5V Monitor
Read-only menu, display the voltage -5V
Menu # 11 -
+24V Monitor
Read-only menu, display the v24V
