8
GB
|
Operating Instruction
2.2 Mulching insert
The mulching insert prevents grass from being collected
by blocking the collection chute. This allows the grass
clippings to be deposited back on the lawn during cutting.
1.
Open the rear deflector guard, hold it in position and
insert the mulching insert into the rear discharge
chute (Fig. 6). Ensure the lower side of the handle
snaps in place.
2. Press the lower side of the handle to release and re-
move the mulching insert (Fig. 7).
3. When removing the mulching insert, you should drag
it to the left side and remove it from the mower deck.
Fig. 6
Fig. 7
2.3 Side discharge attachment
Use the side discharge attachment when using the prod-
uct for side discharging.
1.
Open the side deflector guard, hold it in position and
align the hooks on the attachment with the rods to
hang it onto (Fig. 8 & Fig. 9).
Fig.
8
Fig. 9
2.
Lift the side deflector guard and pull the attachment
off the rods to remove it.
2.4 Adjusting the handle bar
1. Loosen quick-release clamp.
2. Raise or lower the handle bar according to your
needs (Fig. 10, 11 & 12).
3. Ensure the quick-release clamps are tightened
enough.
Fig. 10 (lowest position)
