P a g e
|
8
www.ikikiuas.fi
3.5
Measurements
and height for a 90-degree angled stove pipe
The height of the chimney connection pipe is measured from the floor level to the centre of the
pipe. The outer diameter of the stove pipe is 115 mm.
A: A stove without a stove baseplate.
Wall protecting heat shield measures 670 mm x 448 mm.
B: A stove with an IKI stove baseplate.
Wall protecting heat shield measures 740 mm x 448 mm.
The height of the stove base is
70 mm.
Wall protecting heat shields are available in black and stainless steel.
NOTE! When ordering the
heat shield, you need to know whether you intend to use a stove base as this determines the size
of the shield.
If the stove will be connected to the IKI T600 chimney, a 30 cm mesh adapter is included in the delivery.
The diameter of the adapter is
250 mm.
