Instruction manual | IKI Pro electric heater
Page 4
Installation and stone-laying instructions
Image 1
Image 2
Image 3
1. Lift and remove the heating
element guide and place small
Kerkes tetra stones in between
the elements one by one.
2. Put the guide back when the
stones have filled the lower half
of the heater.
3. Place about 6 small Kerkes
tetra stones on the top and in
between the heating elements to
keep them separated.
4. Place the inner frame around
the heating elements. Make
sure it rests firmly on the base
plate.
5. Put the outer frame on.
6. Finally, lay large Kerkes tetra
stones between the inner and
outer frame. Place large and
small stones on top of the inner
frame.
NOTE!
If you use rough-cut olivine, or other, stones instead of Kerkes stones, (alternative 2 – semi-
professional use.), the diameter of the stones should be between 5 and 10 cm. Follow the same
instructions as above to fill the space between the inner and outer frames.
