background image

1111

S

SM

MAARRTT  CCH

HAARRGGEERR  #

#44006666..11

C

C AA U

U TT II O

O N

N

O

Onnllyy  uussee  55--66  cceellll  IIkkeelliittee  N

NiiM

MH

H  CChhaarrggeerr

SSM

MAARRTT  CCH

HAARRGGEERR  #

#44006666..11________________________________________________________________________________________

The Smart Charger #4066.1 is a variable input voltage charger that automatically

adjusts for the voltage of the power source, ranging from 100V to 240V. The Smart

Charger adapts to current fluctuations in travel destinations with poorly regulated

power. It provides more complete recharging, prolongs battery life, and offers trickle

maintenance charge.

CChhaarrggiinngg  TTiim

mee

The Smart Charger will fully recharge the DS125 battery pack in 2 hrs.

SSm

maarrtt  CChhaarrggeerr  CCoom

mppoonneennttss

The Smart Charger #4066.1 offers use worldwide by accepting interchangeable

adapter plugs for different electric wall outlets. It is packaged with four interchangeable

charger plugs for USA, European, United Kingdom, and Australian electric outlets.

Choose the appropriate charger plug for your location and slide the chosen plug on the

back of the charger; it snaps into position. To interchange the charger plugs, press UP on

the charger plug to unsnap it from the back of the charger and slide another plug into

position.

SSm

maarrtt  CChhaarrggeerr  IInnddiiccaattoorr  LLiigghhtt

The charge indicator light on the Smart Charger shows the present recharge mode.

It illuminates once connected to both the electric outlet and the Ikelite battery module.

Recharge time with the Smart Charger is 2-hours for a full recharge of the DS125;

afterwards the Smart Charger will automatically switch to provide a trickle maintenance

charge. Only the Smart Charger is capable of providing a trickle maintenance charge

permitting the NiMH pack to be continuously charged for extended periods.

CCO

ON

NTTIIN

NU

UO

OU

USS  iilllluum

miinnaatteedd  lliigghhtt

Indicates that the NiMH module is being quick-charged.

SSLLO

OW

W  BBLLIIN

NKKIIN

NGG  iilllluum

miinnaatteedd  lliigghhtt

Indicates that the NiMH module is fully recharged and the charger is now providing

a trickle maintenance charge, which permits the NiMH module to be continuously

charged for extended time periods.

RRAAPPIID

D  BBLLIIN

NKKIIN

NGG  iilllluum

miinnaatteedd  lliigghhtt

Indicates that the NiMH module was virtually drained (discharged) and the module

is being slow-charged to bring up the NiMHs. Once the NiMHs reach an acceptable

level, then the charger will automatically switch to the quick-charge mode.

1122

S

STTRRO

OBBEE  RREEAADDYY  LLIIGGH

HTT

RREEAAD

DYY  LLIIGGH

HTT ______________________________________________________________________________________________________________

The DS125 strobe features a visual ready light on the side of the strobe that glows

when the strobe has recycled and is ready to fire. The middle #2 LED on the fuel gauge

functions as the visual ready light.

CCO

ON

NFFIID

DEEN

NCCEE  LLIIGGH

HTT __________________________________________________________________________________________________

The DS125 strobe also features a confidence light that will glow if the strobe

properly exposes the picture. The #3 LED on the fuel gauge will glow GREEN for three

seconds if the DS125 strobe quenches, indicating that the strobe has provided proper

exposure. This green confidence light illuminates only in the TTL exposure mode.

Summary of Contents for DS-125

















Reviews: