background image

15

• 

Check each housing control while underwater to ensure that 
they are disengaged. An inadvertently engaged control may limit 
functioning of the camera.

• 

Check that the zoom control is disengaged.

Backscatter or “snow” in images

• 

Position strobes or lights farther away from your lens and at a slight 
angle. Do not light water between the camera and subject.

• 

Avoid using strobes in extremely low-visibility conditions.

Limited Warranty

This Ikelite product is warranted against any manufacturing defects for 
a period of one (1) year from the original date of purchase. Defective 
products should be returned to Ikelite postage paid. Ikelite will, at 
its sole discretion, repair or replace such products, and will return to 
customer postage paid. All other claims of any nature are not covered. 
Except as mentioned above, no other warranty expressed or implied 
applies to this Ikelite product. 

Service and Repairs

Ikelite is most interested in performing any service to ensure that all 
products perform as intended. Evidence of purchase date must be 
provided to obtain warranty service.
No prior authorization is required. You may return directly to us or 
through your dealer. Please include a brief description of the problem, 
any relevant email correspondence, and/or description of the service 
request. Always include name, shipping address, email address, and 
phone number inside of the package. Send postage paid to:

Ikelite Underwater Systems
Attn: Service Department

Summary of Contents for 6148.72

















Reviews: