5 Camera Setting and Adjustment
31
UHL-43 2005 VER1 (E)
■ ⑫
SYSTEM
Menu Item
Initial
setting
Setting value
Description, Remarks
SDI OUT FORMAT
―
IMGAE SIZE
1920x1080
3840x2160 / 1920x1080 /
1280x720
Selects IMAGE SIZE.
―
FREQ&SCAN
59.94P
59.94P / 29.97P / 29.97PsF
/ 23.98P / 23.98PsF /
50P / 25P / 25PsF / 24P /
24PsF /
59.94I / 50I /
119.88I / 100I
Selects the frame rate and scanning method.
―
SAMPLING
YCbCr 4:2:2 YCbCr 422 / RGB 444
Selects the sampling method.
―
MAPPING
3G-SDI
LVL-A
3G-SDI LVL-A / 3G-SDI
LVL-B / HD-SDI / EVS
SL
Selects the SDI mapping.
―
QUAD OUTPUT
3G QL 2SI
3G QL 2SI / 3G QL SQD /
HD QL SQD
Selects the 4K QUAD output method.
―
FORMAT CHANGE
READY
EXECUTE / CANCEL
Sets the above settings.
MON OUT FORMAT
Selects video output of MONITOR OUTPUT.
―
IMGAE SIZE
1920x1080
1920x1080 / 1280x720
(Information display)
Display the IMAGE SIZE.
―
FREQ&SCAN
59.94I
Selects the frame rate and scanning method.
―
SAMPLING
YCbCr 4:2:2
YCbCr 422 (Information
display)
Display the sampling method.
―
MAPPING
HD-SDI
HD-SDI / 3G-SDI LVL-A
(Information display)
Display the SDI mapping.
―
FORMAT CHANGE
READY
EXECUTE / CANCEL
Sets the above settings.
H PHASE
0.0
-100 to +100
Matches the phase of internal synchronization signals with the phase of external
synchronization signals. The internal synchronization goes forward in "-"
direction and delays with "+" direction compared to external synchronization.
V PHASE
0
−
562 to 2249
Matches the phase of internal synchronization signals with the phase of external
synchronization signals. The internal synchronization goes forward in "-"
direction and delays with "+" direction compared to external synchronization.
FILTER SERVO CONT
SERVO
SERVO , MANUAL
SERVO
: Sets to the automatic control.
MANUAL : Sets to the manual control.
BATT WARN VOLT
11.0V
11.0 to 17.0V
Sets the battery voltage value that issues the warning.
SYSTEM MODE
ON
ON, OFF
Sets the setting of camera when remote controller is disconnected.
ON : Camera holds settings.
Auto Iris does not turn on automatically.
OFF : Camera does not hold settings.
Auto iris turns on automatically.
CONTROL SETTING [REMOTE]
Sets the setting for optional REMOTE connector.
―
PROTOCOL
ICCP
ICCP, ISCP
Selects protocol for optional REMOTE connector.
―
ISCP INTERFACE
422A
422A, TTL
Selects the interfce of ISCP.
―
ISCP BAUDRATE
9600
1200, 2400, 4800, 9600,
19200
Sets the baud rate of ISCP.
―
ISCP LOGE
Sets the setting of ISCP LOG.
―
RESET LOG
READY
CANCEL, EXECUTE
Resets the LOG of ISCP.
―
COMM LOG
0
0 to 82
Sets the display number of ISCP LOG data.
―
LOG RUN
START
START, STOP
Starts the recording of LOG.
<< SYSTEM continues to the next page >>
