Ikegami MKC-310HD, Operation Manual

Page: 14 / 54

14
3. Operation
3.1 Connection Example
＊
Terminate the output from VIDEO OUT at 75ohms on the receiver side.
＊
For connection of the power supply, be sure to use the accessory AC adapter.
* FOOT SW to be connected to this device, it conforms to the IEC60601-1
：
2005
* Equipment connected to this unit except FOOTSW that conform to IEC standards
that apply to the equipment or IEC60601-1:2005
* If you are connecting to a device that is in contact with the patient to make the connection in
accordance with IEC60601-1
：
2005 Annex I Table I.1
* While connected, it is necessary to fit the evaluation and IEC60601-1
：
2005
Section 16.