Ikegami MKC-310HD, Operation Manual

Page: 11 / 54

11
2.3 Rear Panel of Camera Control Unit (CCU)
①
VBS Output Connector (SD)
Connects with VBS input monitor, etc. A VIDEO cable (optional) is required for connection.
②
S-VIDEO Output Connector (SD)
Connects with S-VIDEO input monitor, etc. An S-VIDEO cable (optional) is required for connection.
③
RS-232C Connector
Connects with PC unit, etc. A cross cable is required for connection.
④
FOOT Switch Connector
To connect the FOOT SW (option) cable extension from the foot switch.
⑥
Camera Connector
Connects with camera connector of the special camera cable.
Be aware that the size of the camera connector differs on the camera head side and CCU side.
⑦
DVI-D Output Connector
Connects with DVI-D input monitor, etc. A DVI-D cable (optional) is required for connection.
⑧
HD-SDI Output Connector (2 Lines)
Connects with HD-SDI input monitor, etc. The same image is input in two 2 lines.
When connecting use a coaxial cable with a characteristic impedance of 75 Ohms.
⑨
GEN LOCK Connector
When using while synchronized with the phase of another system’s image, inputs synchronizing signals
from the other system. Equivalent to Three-Phase Synchronization (HD).
⑩
SYNC Connector
When using while synchronized with the phase of another system’s image, outputs synchronizing signals
from the other system. Equivalent to Three-Phase Synchronization (HD)
.