Ikegami MKC-310HD, Operation Manual

Page: 12 / 54

12
⑪
POWER Connector
DC12V input. Connect the accessory AC adapter.
⑫
Cable Holder
After passing the power cable through the cable holder, connect to the power connector to prevent the
cable from falling off during use.
⑬
Options
It is possible to mount the two types of optional modules listed below.
・
IP ENCODER module
・
DVI module
⑭
ETHERNET Connector (RJ45)
Can be used with Ethernet 10Base-T/100Base-TX.
For connection with other devices, please connect a cable of category 5 or higher.
⑮
SD CARD
This is the insertion port for the SD card.
＊
The SD card is not included in the equipment spec.
⑯
DVI-D Output Connector
Connects with DVI-D input monitor,etc. A DVI-D cable (option) is required for connection.
⑰
USB port
It is used to connect the USB storage device.
⑱
SD CARD
It is used to insert a SD card or a SDHC card.
It is not compatible with SDXC cards.
⑲
Ethernet connector
It is used to connect the Ethernet cable (category 5 or higher).
⑰
USB port
⑱
SD CARD
⑲
Ethernet connector