Ikegami HDL-4500, Operation Manual

Page: 47 / 70

[ZEBRA SETTING]
Sets the zebra signals.
The zebra signals are striped patterns that appear superimposed on the video. There are two types of zebra signals: the zebra 1
signal which appears in the area where the video level of the subject is higher than the set value for “ZEBRA1 DETECT”, and the
zebra 2 signal which appears only in the area where the video level is the same as the set value for “ZEBRA2 DETECT”.
The striped patterns to be generated for the zebra 1 signal and zebra 2 signal are different. For the zebra 1 signal, thin and diagonal
striped patterns run in the upper right direction of the screen. For the zebra 2 signal, thick and diagonal striped patterns slightly and
slowly run in the lower right direction of the screen.
The zebra 1 signal is used to manage tones for the overall screen. The zebra 2 signal is used to mange partial tones of subjects
associated with memory colors such as face tones.
ZEBRA1 DETECT : Sets the signal level to display the ZEBRA1 indicator .
ZEBRA2 IND : ON : Displays the ZEBRA2 indicator .
OFF : Does not display the ZEBRA2 indicator .
ZEBRA2 DETECT : Sets the signal level to display the ZEBRA2 indicator .
■ SDI MENU MIX
Sets ON/OFF of the superposition of MENU characters and VF indicators to the SDI signals for the SDI OUT1 and SDI OUT2
connectors.
SDI OUT1 : Sets the superposition to the SDI OUT1 connector .
ON : Superimposes .
OFF : Does not superimpose .
SDI OUT2 : Sets the superposition to the SDI OUT2 connector .
ON : Superimposes .
OFF : Does not superimpose .
Even if it is set to “OFF”, the MENU screen is displayed on the analog signal output from “MON OUT connector” on
the back of the camera .
Even if both items are set to “OFF”, the menu screen of “MENU PAGE1” appears by setting the CAM/BAR switch on
the rear of the camera to “BAR” and pressing the MENU switch for several seconds . After that, “ON” can be set by
selecting “SDI MENU MIX” of “MENU PAGE5” .
ZEBRA SETTING
QUIT
ZEBRA1 DETECT
100%
ZEBRA2 IND OFF
ZEBRA2 DETECT 70%
（ 30% 〜 109% ）
（
OFF, ON
）
（ 30% 〜 109% ）
SDI MENU MIX
QUIT
SDI OUT1
OFF
SDI OUT2 ON
（ OFF, ON ）
（
OFF, ON
）
5-22 5 . OPERATION