Ikegami HDL-4500, Operation Manual

Page: 20 / 70

4.2 Tripod Installation
This section explains how to install the camera to the tripod.
There are two ways to install the camera: one is to install it directly to the tripod and the other is to use the dedicated tripod mount
plate (optionally available).
Tr i pod screw hole
Tripod
Camera
Camera attach screw
< In s tallation to a tripod directly >
* A tr i pod screw hole accepts 3/8 i nch
for tr i pod i nstallat i on.
Bottom s i de
1 .
Aligns the tripod screw hole on the camera with the camera attach screw on the tripod.
2 .
Tighten the camera attach screw until the camera is fi rmly secured to the tripod.
Bottom s i de
T - 230
V Wedge
adaptor
Lock lever
Tripod
Camera
Tr i pod mount i ng screw
< In s tallation to the tripod mount plate (T-230) >
* A tr i pod screw hole accepts 3/8 i nch or
1/4 i nch for tr i pod i nstallat i on.
Tr i pod screw hole
(Use for e i ther or both.)
1 .
Insert the camera into the tripod mount plate (T-230), when the tripod screw hole aligns with the tripod mounting screw of the V
Wedge adaptor.
2 .
Tighten the tripod mounting screw of the V Wedge adaptor, and then secure the V Wedge adaptor by closing the lock lever on
the tripod mount plate (T-230).
4 . INSTALLATION and CONNECTIONS 4-2