Ikegami HDL-4500, Operation Manual

Page: 18 / 70

⑧ AWB/ABB indicator
Lights up during execution of AWB or ABB.
- AWB (Auto White Balance) execution : Lights up Green
- ABB (Auto Black Balance) execution : Lights up Orange
- Completion of AWB or ABB : Turn off automatically
- Incompletion / N.G of AWB : Green blinking
- Incompletion / N.G of ABB : Orange blinking
⑨ AWB/ABB select switch
Executes AWB or ABB.
AWB : White balance is adjusted automatically.
By setting this switch to AWB position, the adjustment starts and the adjusted value is stored in memory.
ABB : Black balance is adjusted automatically.
By setting this switch to ABB position, the adjustment starts and the adjusted value is stored in memory.
⑩
MENU select switch (Rotary Encoder)
Displays various information or control items on the monitor to show the camera status by pressing and holding this switch for
more than one second.
Use this switch combined rotary encoder to set the desired item with selection.
HD SDI outputs can be displayed on the MENU screen through the setting of “SDI MENU MIX (MENU PAGE5)” in “5 . 3
Camera Menu” .
⑪ POWER switch
This is a switch for powering on the camera.
ON : The equipment is powered through out.
OFF : All the power is turned off.
⑫
POWER indicator
Lights up during turning the camera ON.
⑬ GAIN select switch
Changes the camera gain.
L, M, H : Each gain position is set using the menu screen.
A speci fi ed value can be selected from -6 to +78dB and memorized in L, M, H.
But desired gain values should be set to satisfy L < M < H.
⑭ CAM/BAR select switch
Use to select the video signal on the color bar signal.
CAM : Outputs the video signal.
BAR : Output the color bar signal
⑮ WARNING indicator
Lights up when the input voltage is low.
Blinks in red when a trouble occurs for the camera or a fan.
For further details of troubles, refer to “WARNING (MENU PAGE5)” in “5.3 Camera Menu”.
・ When the operation control panel is connected, GAIN select switch and CAM/BAR select switch cannot be
controlled .
・ When the camera menu “SYSTEM SELECT” is set to ON in Engineering mode, the values settings from the
operation control panel have a priority over the switch settings on the back of the camera .
3 . NAME and FUNCTION of EACH PART 3-3