5.2 Settings from the Menu
88
HDK-55 1206 VER1 (U)
Menu Item
Initial
Setting
Setting Value
De
s
cription, Remark
s
MENU DATA
ALL
VF
LENS TYPE
OFF
OFF, C.PORTABLE,
C.STUDIO, C.FIELD,
F.PORTABLE, F.STUDIO,
F.FIELD
To match the zoom tracking DTL operation characteristics
with the lens zoom characteristics, set the time of the lens used
in the camera.
OFF
:
Game tracking DTL is OFF.
C.PORTABLE
:
Canon portable lens
C.STUDIO
:
Canon studio lens
C.FIELD
:
Canon
fi
eld lens
F.PORTABLE
:
Fujinon portable lens
F.STUDIO
:
Fujinon studio lens
F.FIELD
:
Fujinon
fi
eld lens
Set by lens
fi
le (NO.1-8).
-
AUTO x0.8 CONV
OFF
OFF, ON
Set automatic switching of the aspect ratio converter (X0.8)
internal lens.
If set to ON, it operates in linked motion with the output aspect
ratio of the down converter to carry out automatic switching.
-
X0.8 CONV CONT
OFF
OFF, ON
If turned ON when using the X0.8 converter internal lens,
control is possible.
When not using the X0.8 converter internal lens, set to OFF.
-
LENS SERIAL I/F
ON
ON, OFF
Set whether to respond to the serial interface of the lens or not.
-
LEVEL ADJUST
MASTER GAMMA
0.0
-100
to
+100
Sets the master gamma value.
The gamma value decreases in the direction of " -100" and
increases in the direction of "+100".
-
-
MASTER PED
0.0
-100
to
+100
Sets the master pedestal value.
The pedestal value decreases in the direction of "-100" and
increases in the direction of "+100".
-
-
MASTER FLARE
0.0
-100
to
+100
Sets the master
fl
are value.
The
fl
are value decreases in the direction of "-100" and
increases in the direction of "+100".
-
-
DTL GAIN
0.0
-100
to
+100
Sets the detail amount.
The detail amount decreases in the direction of "-100" and
increases in the direction of "+100".
-
-
ADJ CLR
READY
READY,
PUSH SET
→
CLR,
CANCEL
Returns the settings changed with LEVEL ADJUST to the state
prior to change as a group.
-
-
PROCESS MODE
SMOOTH STEP GAIN
ON-0.5s
OFF,
ON-0.3s, ON-0.5s, ON-
0.7s, ON-1.0s, ON-1.5s,
ON-2.0s
Changes the STEP GAIN step by step.
Possible to choose the time until convergence.
-
SMOOTH STEP ECC
ON-0.5s
OFF,
ON-0.3s, ON-0.5s, ON-
0.7s, ON-1.0s, ON-1.5s,
ON-2.0s
Changes the STEP ECC step by step.
Possible to choose the time until convergence.
-
MATRIX
OFF
OFF, 1, 2, 3
There are independent settings for three channels of the matrix,
which can be switched.
-
-
HI-LIGHT DTL
ON
OFF, ON
Possible to increase the DTL level of the highlight part.
-
-
GAIN
0.0
1
to
100
Sets the level value to be emphasized.
Level increases in the direction of +100.
-
-
LIMIT
0.0
-100
to
+100
Sets the upper limit for the emphasized DTD level.
The "-100" direction lowers the limit. The "+100" direction
raises the limit and lowers the DTL level.
-
-
SMOOTH KNEE
TYPE-1
OFF, TYPE1,
TYPE2, TYPE3
SMOOTH KNEE is a function to adjust the compression level
of the brightness signal with KNEE. It can be selected from the
following three setting types.
TYPE1 : The compression rate of brightness is low.
TYPE2 : The compression rate of brightness is medium.
TYPE3 : The compression rate of brightness is high.
-
-
DTL V FILTER
OFF
ON, OFF
If the V
fi
lter of the DTL is ON, the resolution feeling in
direction V diminishes, making it possible to obtain an image
with less noise.
-
PRESET FILE LOAD
Function to load the user settings (ENGINEER SET FILE)
or factory settings (FACTORY SET FILE) for the level
adjustment or menu of the camera.
Used to return the camera state back to the previous or initial
settings.
FILE SELECT
ENGINEER ENGINEER, FACTORY
ENGINEER : Initializes the state back to the user setting.
FACTORY : Initializes the state back to the initial factory
setting.
-
-
LOAD START
READY
READY, START, CANCEL Executes initialization.
-
-
MENU MODE
ENGINEER MENU
OFF
OFF, ON
If set to ON, possible to display engineer menu.
If the camera power is turned OFF, this menu setting returns to
OFF.
-
-
Summary of Contents for HDK-55
